3 Terms and definitions For the purposes of this document, the following terms and definitions apply. ISO and IEC maintain terminology databases for use in standardization at the following addresses:
3.1 mobile deviceportable computing device that at least:
— has a small form factor such that it can easily be carried by a single individual; — is designed to operate, transmit and receive information without a wired connection; — possesses local, nonremovable or removable data storage; — includes a self-contained power source; — includes a display; — includes a means for the holder of the portable computing device to interact with the device
Note 1 to entry: Adapted from NIST SP 800-157.
3.2 mdoc document or application that resides on a mobile device (3.1) or requires a mobile device as part of the process to gain access to the document or application 3.3 mdoc reader device that can retrieve mdoc (3.2) data for verification purposes 3.4 mdoc holder individual to whom an mdoc (3.2) is issued 3.5 mdoc verifier person or organization using and/or controlling an mdoc reader (3.3) to verify an mdoc (3.2) 3.6 mDL driving licence that fulfils at least the same function as an IDL but, instead of being paper or plastic based, is an mdoc (3.2) Note 1 to entry: ISO-compliant driving licence (IDL) is defined in ISO/IEC 18013-1. 3.7 mDL reader mdoc reader (3.3) that can retrieve mDL (3.6) data 3.8 mDL holder individual to whom an mDL (3.6) is issued, i.e. legitimate holder of the driving privileges reflected on an mDL 3.9 mDL verifier person or organization using and/or controlling an mDL reader (3.7) to verify an mDL (3.6) 3.10 licensing authority authorized agent organisation that issues a driving licence EXAMPLE: National, federal, state, provincial, regional, territorial, or local Ministry of Transport, Department of Motor Vehicles, or Police Agency. [SOURCE:ISO/IEC 18013-1:2018, 3.15] 3.11 issuing country country which issued the driving licence or within which the licensing authority (3.10) is located [SOURCE:ISO/IEC 18013-1:2018, 3.12, modified — The words “according to Annex F” have been removed.] 3.12 issuing authority licensing authority (3.10), or issuing country (3.11) if separate licensing authorities have not been authorized [SOURCE:ISO/IEC 18013-1:2018, 3.11] 3.13 issuing authority infrastructure infrastructure under control of the issuing authority (3.12) 3.14 issuing authority CA certificate authority operated by or on behalf of an issuing authority (3.12) 3.15 device retrieval method of data retrieval exclusively using the interface between the mdoc (3.2) and the mdoc reader (3.3) 3.16 server retrieval method of data retrieval using the interface between the mdoc reader (3.3) and the issuing authorityinfrastructure (3.13) 3.17 server retrieval token token identifying the mdoc holder (3.4) and the mdoc (3.2) to the issuing authority (3.12) 3.18 PCD mode mode in which an NFC-enabled mobile device (3.1) operates as a PCD [SOURCE:ISO/IEC 14443‑3:2018, 3.7, modified — The words “a PXD” have been replaced with “an NFC-enabled mobile device”.] 3.19 PICC mode mode in which an NFC-enabled mobile device (3.1) operates as a PICC [SOURCE:ISO/IEC 14443‑3:2018, 3.8, modified — The words “a PXD” have been replaced with “an NFC-enabled mobile device”.] |