Section numbers correspond to the eGov 2.0 draft profile.
2.2.1 Metadata Profiles (IOP, Scott Cantor - cantor.2@osu.edu; PKIX, Terry McBride)
Test the ability of an implementation to produce and consume metadata in accordance with the two mandatory profiles identified, and to support the "Metadata Extension for Entity Attributes" profile.
Production of IOP-compliant Metadata
Scope
- Verify the ability to produce metadata conformant to the Metadata IOP.
IOP-conformant metadata has a different meaning from metadata intended to be evaluated in a PKIX environment, but syntactically should be identical based on the eGov profile language, so this should be sufficient to test production of metadata for both profiles.
Preconditions
- Implementation configured sufficiently to produce metadata identifying its signing, TLS, and encryption keys.
- Details of expected md:KeyDescriptor content available to tester
Test Sequence
1. Access published metadata
The metadata produced by the implementation is obtained.
CONFIRM: The content(s) of the md:KeyDescriptor element(s) matches the expected output.
Consumption of IOP-compliant Metadata
Testing is best accomplished with a fixed implementation to test against, as the purpose is not to test actual protocol correctness, but use of the metadata itself.
Scope
- Verify the ability to process metadata conformant to the Metadata IOP.
- Verify support for bare keys, self-signed, arbitrary-CA, and expired certificates.
- Check for bypass of CRL or OCSP extensions in certificates.
- Verify ability to match keys between different certificates
- Verify recognition of a removed/revoked key.
- Verify enforcement of validUntil.
Preconditions
- Keys and certificates generated with various characteristics:
- Self-signed, no revocation-related extensions
- Signed by a CA, with revocation-related extensions
- Expired
- Multiple certificates with the same public key
Test Sequence
1. Test Bare Keys
a. Metadata is prepared for the fixed implementation containing a pair of md:KeyDescriptors both containing a ds:KeyValue containing a ds:RSAKeyValue. The fixed implementation is configured to use one of the keys for signing and/or TLS purposes. The metadata is supplied to the candidate system, and one or more SSO operations is attempted. Bindings should be chosen to exercise both signature verification and TLS authentication if possible.
CONFIRM: The SSO operations are successful based on the use of the key(s) that appear in the metadata.
b. The fixed implementation is switched to use the second of the pair of keys in its metadata.
CONFIRM: The SSO operations are successful based on the use of the key(s) that appear in the metadata.
c. The fixed implementation is switched to use a key that is NOT in its metadata.
CONFIRM: The SSO operations are unsuccessful.
2. Test Self-Signed Certificates
a. Metadata is prepared for the fixed implementation containing a pair of md:KeyDescriptors both containing a ds:X509Certificate, with the certificates self-signed. One of the certificates should be expired. The fixed implementation is configured to use one of the certificates for signing and/or TLS purposes. The metadata is supplied to the candidate system, and one or more SSO operations is attempted. Bindings should be chosen to exercise both signature verification and TLS authentication if possible.
CONFIRM: The SSO operations are successful based on the use of the key(s) that appear in the metadata.
b. The fixed implementation is switched to use the second of the pair of certificates in its metadata.
CONFIRM: The SSO operations are successful based on the use of the key(s) that appear in the metadata.
c. The fixed implementation is switched to use a different certificate that is not in the metadata but contains the same key as one that is.
CONFIRM: The SSO operations are successful based on the use of the key(s) that appear in the metadata.
d. The fixed implementation is switched to use a certificate and key that is NOT in its metadata.
CONFIRM: The SSO operations are unsuccessful.
2. Test CA-Issued Certificates
a. Metadata is prepared for the fixed implementation containing a pair of md:KeyDescriptors both containing a ds:X509Certificate, with the certificates signed by one or more arbitrary CAs. The certificates should, if possible, include a CRL distribution point or OCSP location extension. These endpoints should not exist or be unavailable to the testing environment. The fixed implementation is configured to use one of the certificates for signing and/or TLS purposes. The metadata is supplied to the candidate system, and one or more SSO operations is attempted. Bindings should be chosen to exercise both signature verification and TLS authentication if possible.
CONFIRM: The SSO operations are successful based on the use of the key(s) that appear in the metadata. No delays in processing occur as a result of failed attempts to contact non-existent or unavailable CRL or OCSP endpoints.
b. The fixed implementation is switched to use the second of the pair of certificates in its metadata.
CONFIRM: The SSO operations are successful based on the use of the key(s) that appear in the metadata.
c. The fixed implementation is switched to use a different certificate that is not in the metadata but contains the same key as one that is.
CONFIRM: The SSO operations are successful based on the use of the key(s) that appear in the metadata.
d. The fixed implementation is switched to use a key that is NOT in its metadata.
CONFIRM: The SSO operations are unsuccessful.
3. Verify Revocation and validUntil
a. Metadata is prepared for the fixed implementation containing a md:KeyDescriptor containing a key in one of the supported formats. The fixed implementation is configured to the key for signing and/or TLS purposes. The metadata is supplied to the candidate system, and one or more SSO operations is attempted. Bindings should be chosen to exercise both signature verification and TLS authentication if possible.
CONFIRM: The SSO operations are successful based on the use of the key(s) that appear in the metadata.
b. The metadata is altered to remove the md:KeyDescriptor and the candidate implementation is configured to refresh the appropriate source of metadata.
CONFIRM: The SSO operations are unsuccessful.
c. The metadata is altered to add back the md:KeyDescriptor, but a validUntil attribute is added such that the metadata is expired, and the candidate implementation is configured to refresh the appropriate source of metadata.
CONFIRM: The SSO operations are unsuccessful.
Support for "Metadata Extension for Entity Attributes" Profile
Scope
- Test SP acceptance of SSO based on IdP metadata extension content
The proposed tag would be an attribute named "urn:oasis:names:tc:SAML:attribute:assurance-certification" and would appear as follows:
<EntityDescriptor entityID="https://idp.example.org/SAML" ... > <Extensions> <attr:EntityAttributes xmlns:attr="urn:oasis:names:tc:SAML:metadata:attribute"> <saml:Attribute NameFormat="urn:oasis:names:tc:SAML:2.0:attrname-format:uri" Name="urn:oasis:names:tc:SAML:attribute:assurance-certification"> <saml:AttributeValue> http://foo.example.com/assurance/loa1 </saml:AttributeValue> </saml:Attribute> </attr:EntityAttributes> </Extensions> <IDPSSODescriptor...> ... </IDPSSODescriptor> </EntityDescriptor>
Preconditions
- SP configured with metadata for candidate IdP containing acceptable LOA "tag".
- SP configured with metadata for candidate IdP not containing acceptable LOA "tag".
- SP configured to require presence of "tag" in metadata for IdPs before it will accept SSO from them.
Test Sequence
1. Verify use of acceptable IdP
SP-initiated or IdP-initiated SSO is used to produce an assertion response from the candidate IdP.
CONFIRM: SSO is successful.
2. Verify non-use of unacceptable IdP
SP-initiated or IdP-initiated SSO is used to produce an assertion response from the candidate IdP.
CONFIRM: SSO is unsuccessful based on the policy requiring the tag.
2.2.2 Metadata Exchange (Scott Cantor - cantor.2@osu.edu)
Test the ability of an implementation to publish and consume metadata documents, and maintain the information in real time. Testing import and verification is best accomplished with a fixed set of "sources" to import and test against, as the purpose is not to test actual protocol correctness, but use of the metadata itself.
It may be necessary to bypass, or incorporate a limited amount of, metadata verification functionality in order for metadata import to be tested.
Publication
Scope
- Publication (and maintenance) of metadata via Well-Known-Location resolution profile.
Preconditions
- An http/https entityID defined that is suitable for dereferencing
- Appropriate configuration of that entityID is completed
- Multiple details of configuration are available to tester (location of a profile endpoint, a key descriptor, etc.)
- Any pre-publishing step required is completed
Test Sequence
1. Access published metadata
The entityID is dereferenced to obtain the metadata document.
CONFIRM: The metadata is available, and correctly reflects the entityID accessed, and is returned with the correct MIME type (application/xml+samlmetadata). The configuration details expected are found in the metadata.
2. Alter metadata and republish
Alter the configuration (changing an endpoint, a key descriptor, etc.) and republish, then repeat the first test.
CONFIRM: As in (1), but also that the implementation did not require a restart or disruption of service.
Import from File
Scope
- Metadata consumption via local file
- Ability to detect and ignore invalid metadata
- Support for batches (md:EntitiesDescriptor)
- Ability to update from a changed source without disruption
- Maintenance of valid operation after a change that renders a source invalid.
Preconditions
- Valid metadata is available to the implementation via a local filesystem path
- The valid metadata contains at least two md:EntityDescriptor elements inside an md:EntitiesDescriptor element
- Invalid metadata is available to the implementation via a (different) local filesystem path
- Appropriate configuration for the use of those paths is applied
- No configuration of the information supplied via metadata is in place prior to import
Test Sequence
1. Import valid metadata
The implementation is directed in whatever manner is required to import or make use of the valid metadata. A set of SAML interactions is then attempted between the implementation and the metadata subject. A basic test of SP-initiated SSO is sufficient.
CONFIRM: Operation of a defined set of SAML interactions with the metadata subject is successful based on the content of the metadata (correct endpoints used, keys used in accordance with one of the supported metadata profiles, etc.).
2. Import invalid metadata
The implementation is directed in whatever manner is required to import or make use of the invalid metadata. A set of SAML interactions is then attempted between the implementation and the metadata subject. A basic test of SP-initiated SSO is sufficient.
CONFIRM: Import and/or interaction with the metadata subject is unsuccessful.
3. Update valid metadata
The valid metadata is modified in some manner that is detectable via the interactions used to confirm successful import (changing an endpoint, a key descriptor, etc.), but remains valid. If the implementation requires manual intervention to recognize the change, this is done. The SAML interactions are repeated.
CONFIRM: The interactions remain successful but cognizant of the change(s). No restart or other service interruption was required to accomodate the change.
4. Update valid metadata with invalid change.
The valid metadata is modified in some manner that renders it invalid. If the implementation requires manual intervention to recognize the change, this is done. The SAML interactions are repeated.
CONFIRM: The interactions remain successful in accordance with the metadata that existed prior to the change. No restart or other service interruption was required to accomodate the change.
Import from URL
Scope
- Metadata consumption via multiple http and https sources
- Ability to detect and ignore invalid or unavailable metadata
- Support for caching
- Ability to update via a changed source without disruption
- Maintenance of valid operation after a change that renders a source invalid.
Preconditions
- Valid metadata is available to the implementation via at least two URLs (one http, one https)
- Invalid metadata is available to the implementation via a different, possibly unavailable, URL
- Appropriate configuration for the use of those URLs is applied
- No configuration of the information supplied via metadata is in place prior to import
Test Sequence
1. Import valid metadata
The implementation is directed in whatever manner is required to import or make use of the valid metadata. A set of SAML interactions is then attempted between the implementation and the metadata subjects (at least two, one for each source of metadata). A basic test of SP-initiated SSO is sufficient.
CONFIRM: Operation of a defined set of SAML interactions with the metadata subjects is successful based on the content of the metadata (correct endpoints used, keys used in accordance with one of the supported metadata profiles, etc.).
2. Import invalid metadata
The implementation is directed in whatever manner is required to import or make use of the invalid metadata source. A set of SAML interactions is then attempted between the implementation and the metadata subject. A basic test of SP-initiated SSO is sufficient.
CONFIRM: Import and/or interaction with the metadata subject is unsuccessful.
3. Re-import unchanged metadata
The implementation is directed in whatever manner is required to re-import/refresh the valid source of metadata, with the source maintaining the same caching indicator(s). The SAML interactions are repeated.
CONFIRM: The import resulted in no exchange of the metadata document across the network, and the interactions remain successful in accordance with the metadata that existed prior to the re-import.
4. Re-import changed metadata
The valid metadata is modified in some manner that is detectable via the interactions used to confirm successful import (changing an endpoint, a key descriptor, etc.), but remains valid. The implementation is directed in whatever manner is required to re-import/refresh the valid source of metadata. The SAML interactions are repeated.
CONFIRM: The interactions remain successful but cognizant of the change(s). No restart or other service interruption was required to accomodate the change.
5. Update valid metadata with invalid change.
The valid metadata is modified in some manner that renders it invalid. The implementation is directed in whatever manner is required to re-import/refresh the now-invalid source of metadata. The SAML interactions are repeated.
CONFIRM: The interactions remain successful in accordance with the metadata that existed prior to the change. No restart or other service interruption was required to accomodate the change.
2.2.2.1 Metadata Verification (Scott Cantor - cantor.2@osu.edu)
Test the ability of an implementation to verify metadata before importing/accepting it for use. The focus is on import of remote sources, since local file sources can naturally undergo checking outside of the import process before being made available.
Verification by Known Key
Scope
- Test verification of root level signature via a known key.
Preconditions
- Any MTI signature algorithm may be used.
- Valid metadata signed by a known key is available at an http or https URL.
- Valid metadata with an invalid signature is available via a different URL.
- The key should not be present inside the signature of the metadata document.
- Appropriate configuration for the use of the URLs and verification with the key is applied.
- No configuration of the information supplied via metadata is in place prior to import
Test Sequence
1. Import and verify valid metadata
The implementation is directed in whatever manner is required to import or make use of the valid metadata. A set of SAML interactions is then attempted between the implementation and the metadata subject. A basic test of SP-initiated SSO is sufficient.
CONFIRM: Operation of a defined set of SAML interactions with the metadata subject is successful based on the content of the metadata (correct endpoints used, keys used in accordance with one of the supported metadata profiles, etc.).
2. Import and (fail to) verify invalid signature
The implementation is directed in whatever manner is required to import or make use of the metadata with the invalid signature. A set of SAML interactions is then attempted between the implementation and the metadata subject. A basic test of SP-initiated SSO is sufficient.
CONFIRM: Import and/or interaction with the metadata subject is unsuccessful.
Verification by Certificate Validation
Scope
- Test verificiation of root level signature via path validation of a signing certificate.
Preconditions
- Any MTI signature algorithm may be used.
- Two certificates issued by a sample certificate authority are created, one valid, one expired.
- The certificate must be present inside the signature of the metadata document.
- Valid metadata signed by the key in the valid certificate is available at an http or https URL.
- Valid metadata signed by the key in the invalid certificate is available via a different URL.
- Appropriate configuration for the use of the URLs and verification with the issuing CA is applied.
- No configuration of the information supplied via metadata is in place prior to import
Test Sequence
1. Import and verify valid metadata
The implementation is directed in whatever manner is required to import or make use of the valid metadata. A set of SAML interactions is then attempted between the implementation and the metadata subject. A basic test of SP-initiated SSO is sufficient.
CONFIRM: Operation of a defined set of SAML interactions with the metadata subject is successful based on the content of the metadata (correct endpoints used, keys used in accordance with one of the supported metadata profiles, etc.).
2. Import and (fail to) verify invalid signature
The implementation is directed in whatever manner is required to import or make use of the metadata signed with the invalid certificate. A set of SAML interactions is then attempted between the implementation and the metadata subject. A basic test of SP-initiated SSO is sufficient.
CONFIRM: Import and/or interaction with the metadata subject is unsuccessful.
2.3 Name Identifiers (Paul Madsen - paulmadsen@rogers.com)
The tests will confirm that IdP and SP properly implement support for the Name Identifier formats of
- urn:oasis:names:tc:SAML:2.0:nameid-format:transient
- urn:oasis:names:tc:SAML:2.0:nameid-format:persistent
Such support will consiste of proper handling of the
- AuthnRequest's NameIDPolicy
- NameID in the returned Response.
PaulM: The existing SAML test plan 3.2.2 would appear to cover the necessary tests for 'persistent', but testing for 'transient' is far more limited, ie only in Test Case J and only in the case of an unsolicited Response. Should this be more symmetrical?
NB the SAML eGov 1.5 profile, in addition to defining name identifier formats of transient and persistent as MTI, also defined 'unspecified' as MTI. The corresponding tests in the SAML test plan 3.2.2 need be removed/softened.
2.4 Attributes (Denny Prvu - Denny.Prvu@ca.com)
[What should be CONFIRMED through testing from this section?]
2.5.1 Identity Provider Discovery (Andrew Lindsay-Stewart - alindsay-stewart@fugensolutions.com)
[What should be CONFIRMED through testing from this section?]
2.5.2.1 Authentication Requests Binding and Security Requirements (Jonathan Scudder - Jonathan.Scudder@forgerock.com)
Confirm support for the HTTP-Redirect binding for transmitting AuthnRequest messages
Testing that the HTTP-Redirect binding for AuthnRequest messages is supported can be performed through metadata analysis or by verifying that the AuthnRequest is accepted when triggering SP-initiated SSO. The latter is used for this test as a more accurate indication of actual support.
Scope:
- Confirm that a valid AuthnRequest transmitted to the IDP is accepted and acted upon.
Preconditions:
- Metadata exchanged and imported
- No current user session on IDP
- Any authentication method configured on IDP side
- Test performed with NameID setting supported by both IDP and SP
Test sequence:
1. Trigger SP-initiated single sign-on with valid parameters
2. Observe IDP handling of the request
CONFIRM: IDP authentication is triggered without error.
Confirm support for generation of signatures
This involves verifying that an AuthnRequest can be generated with signatures on the SP side by
triggering such a message and examining the information transmitted to the IDP using the
HTTP-Redirect binding. The correct creation of signatures is not tested in this case.
Scope:
- Test for the presence of a signature for AuthnRequest when transmitting to IDP.
Preconditions:
- Metadata exchanged and imported
- Signing key created and configured on the SP side
- SP configured to sign authentication requests
- SP and IDP configured to use HTTP-Redirect binding for AuthnRequest
- A signature algorithm supported by both IDP and SP is used for the test
Test sequence:
1. Trigger SP-initiated single sign-on using the HTTP-Redirect binding
2. Observe parameters of the HTTP redirect
CONFIRM: presence of the SigAlg and Signature parameters
Confirm support for verification of signatures
This case checks that an IDP can receive a signed AuthnRequest and act approriately according to the validity of the signature.
Scope:
- Test consumption of a signed AuthnRequest with and without error according to validity.
Preconditions:
- Metadata exchanged and imported
- Signing keys created, exchanged and configured
- SP configured to sign authentication requests
- SP and IDP configured to use HTTP-Redirect binding for AuthnRequest
- A signature algorithm supported by both IDP and SP is used for the test
Test sequence:
1. Trigger SP-initiated single sign-on using the HTTP-Redirect binding
2. Observe IDP handling of the request
CONFIRM: IDP accepts AuthnRequest message without error
3. Remove signature public key from IDP
4. Trigger SP-initiated single sign-on using the HTTP-Redirect binding
5. Observer IDP handling of the request
CONFIRM: IDP rejects AuthnRequest due to invalidity of the signature
2.5.2.2 Authentication Requests Message Content (Jonathan Scudder - Jonathan.Scudder@forgerock.com)
These test cases check that the Service Provider is capable of including the child elements and attributes listed in the eGov 2.0 profile in an AuthnRequest message. The tests are carried out using the HTTP-Redirect binding on the assumption that support for child elements and attributes in the message is not affected by the choice of binding. The latter tests check that the Identity Provider handles these and other child elements and attributes in an appropriate way. The correct formation of these elements are not tested in these cases.
Confirm Service Provider support for AuthnRequest child elements <saml2p:RequestedAuthnContext> and <saml2p:NameIDPolicy>
Scope:
- Verify possibility to specify, and presence of, the AuthnRequest child elements
<saml2p:RequestedAuthnContext> and <saml2p:NameIDPolicy>
Preconditions:
- Metadata exchanged and imported
- Service provider metadata contains multiple indexed AttributeConsumingService entries
- SP and IDP configured to use HTTP-Redirect binding for AuthnRequest
Test sequence:
1. Configure SP to specify one or more authentication contexts
CONFIRM: SP offers administrative capability to specify authentication contexts in the request
2. Configure SP to specify a NameIDPolicy for one or all authentication requests
CONFIRM: SP offers administrative capability to specify a NameIDPolicy in the request
3. Trigger SP-initiated single sign-on using the HTTP-Redirect binding
4. Observe HTTP redirect parameters and decode the SAMLRequest value using the DEFLATE algorithm reversal
CONFIRM: presence of element <saml2p:RequestedAuthnContext> as a child of AuthnRequest element
CONFIRM: presence of element <saml2p:NameIDPolicy> as a child of AuthnRequest element
Confirm Service Provider support for AuthnRequest attributes ForceAuthn and IsPassive
Scope:
- Verify possibility to specify, and presence of, the AuthnRequest attributes ForceAuthn and IsPassive
Preconditions:
- Metadata exchanged and imported
- SP and IDP configured to use HTTP-Redirect binding for AuthnRequest
Test sequence:
1. Trigger SP-initiated single sign-on using the HTTP-Redirect binding, specifying that authentication should be forced
CONFIRM: SP offers capability for specifying whether authentication should be forced or not
2. Observe HTTP redirect parameters and decode the SAMLRequest value using the DEFLATE algorithm reversal
CONFIRM: presence of attribute "ForceAuthn" with value "true" on element <samlp:AuthnRequest>
3. Trigger SP-initiated single sign-on using the HTTP-Redirect binding, specifying that the request should be passive
CONFIRM: SP offers capability for specifying whether authentication request should be passive or not
4. Observe HTTP redirect parameters and decode the SAMLRequest value using the DEFLATE algorithm reversal
CONFIRM: presence of attribute "IsPassive" with value "true" on element <samlp:AuthnRequest>
Confirm Service Provider support for AuthnRequest attributes AssertionConsumerServiceURL, ProtocolBinding, and AttributeConsumingServiceIndex
Scope:
- Verify possibility to specify, and presence of, the AuthnRequest attributes AssertionConsumerServiceURL, ProtocolBinding, and AttributeConsumingServiceIndex
Preconditions:
- Metadata exchanged and imported
- Service provider metadata contains indexed AssertionConsumerService entries
- Service provider metadata contains indexed AttributeConsumingService entries
- SP and IDP configured to use HTTP-Redirect binding for AuthnRequest
Test sequence:
1. Trigger SP-initiated single sign-on using the HTTP-Redirect binding, specifying that a particular AssertionConsumerServiceURL be called using a specified ProtocolBinding
CONFIRM: SP offers capability for specifying the AssertionConsumerService URL
CONFIRM: SP offers capability for specifying the ProtocolBinding to be used
2. Observe HTTP redirect parameters and decode the SAMLRequest value using the DEFLATE algorithm reversal
CONFIRM: presence of attribute "AssertionConsumerServiceURL" with the URL specified in step 1 as value, on element <samlp:AuthnRequest>
CONFIRM: presence of attribute "ProtocolBinding" with the URL specified in step 1 as value, on element <samlp:AuthnRequest>
3. Trigger SP-initiated single sign-on using the HTTP-Redirect binding, specifying that a particular AttributeConsumingServiceIndex be called
CONFIRM: SP offers capability for specifying the AttributeConsumingServiceIndex value
4. Observe HTTP redirect parameters and decode the SAMLRequest value using the DEFLATE algorithm reversal
CONFIRM: presence of attribute "AttributeConsumingServiceIndex" with the index specified in step 3 as value, on element <samlp:AuthnRequest>
Confirm Identity Provider support for AuthnRequest child elements and attributes that should be accepted
Scope:
- Verify IDP handling of AuthnRequest child elements <saml:Subject>, <NameIDPolicy>, <saml:Conditions>, <RequestedAuthnContext>, <Scoping>, and attributes AssertionConsumerServiceIndex and ProviderName
Preconditions:
- Metadata exchanged and imported
- Service provider configured to send AuthnRequest messages with Subject, NameIDPolicy, Conditions, RequestedAuthnContext, Scoping, AssertionConsumerServiceIndex and ProviderName
- Service provider metadata contains indexed AssertionConsumerService entries
- SP and IDP configured to use HTTP-Redirect binding for AuthnRequest
Test sequence:
1. Trigger SP-initiated single sign-on using the HTTP-Redirect binding (note prerequisites)
2. Observe HTTP redirect parameters and decode the SAMLRequest value using the DEFLATE algorithm reversal
CONFIRM: presence of attributes and child elements outlined above, in element <samlp:AuthnRequest>
3. Observe IDP handling of AuthnRequest
CONFIRM: IDP accepts AuthnRequest without error, or returns apprioriate error messages
Confirm Identity Provider support for AuthnRequest child elements and attributes that should be utilized
Scope:
- Verify IDP handling of AuthnRequest child element <saml2p:NameIDPolicy>, and attributes ProtocolBinding, ForceAuthn, IsPassive, AttributeConsumingServiceIndex.
Preconditions:
- Metadata exchanged and imported
- Service provider capable of sending AuthnRequest messages with <saml2p:NameIDPolicy>, ForceAuthn, IsPassive, and AttributeConsumingServiceIndex.
- Service provider metadata contains indexed AttributeConsumingService entries
- IDP configured to provide attribute response
- Valid and known account that can be authenticated using an available authentication method on IDP
Test sequence:
1. Trigger SP-initiated single sign-on specifying NameIDPolicy and AttributeConsumingServiceIndex
2. Authenticate to IDP using test account
3. Observe response message
CONFIRM: attributes sent according to AttributeConsumingServiceIndex
CONFIRM: NameID supplied according to NameIDPolicy specified
4. Trigger SP-initiated single sign-on specifying forced authentication
5. Observe IDP behaviour
CONFIRM: user presented with authentication method on IDP
6. Terminate user sessions on IDP and SP
7. Trigger SP-initiated single sign-on specifying passive request
8. Observe IDP bevhaiour
CONFIRM: IDP returns control to SP without presenting the user with an authentication method
Confirm Identity Provider verification of AssertionConsumerServiceURL value
Scope:
- Verify IDP handling of AuthnRequest attributes AssertionConsumerServiceURL and ProtocolBinding
Preconditions:
- Metadata exchanged and imported
- Service provider capable of sending AuthnRequest messages with AssertionConsumerServiceURL and ProtocolBinding attributes
- Service provider metadata contains AssertionConsumerService entries
- IDP configured to provide attribute response
- Valid and known account that can be authenticated using an available authentication method on IDP
Test sequence:
1. Trigger SP-initiated single sign-on specifying an AssertionConsumerServiceURL and ProtocolBinding that matches values in SP metadata
2. Observe IDP behaviour
CONFIRM: IDP accepts AuthnRequest without error
3. Trigger SP-initiated single sign-on specifying an AssertionConsumerServiceURL and ProtocolBinding that do not match values in SP metadata
4. Observe IDP behaviour
CONFIRM: IDP responds with appropriate error message
2.5.3.1 Responses Binding and Security Requirements (Diego Lopez - diego.lopez@rediris.es)
Confirm...
+ Availability of both Artifact and POST bindings to issue <saml2:Response> at IdPs
+ Consumption (SP) and production (IdP) of unsolicited <saml2:Response>
+ IdP error reporting via a <saml2:Response> unless no endpoint is available
+ Issuance (IdP) and acceptance (SP) of signed <saml2:Assertion>
+ Issuance (IdP) and acceptance (SP) of <saml2:EnctyptedAssertion>
Responses to Authentication Failure
To complete this Test Case, the IdP under test must receive an authentication request for a User it cannot or will not authenticate. The cause of this authentication failure is not relevant but is expected to be an event such as:
- The user chooses to cancel the authentication process.
- The user identity does not exist or the number of failed login attempts has been exceeded.
- The user forgets his/her password and must wait for an email containing the password.
Preconditions
- Metadata exchanged and loaded
- Encryption disabled
- User Identities Not Federated
Test Sequence
1. AuthnRequest from SP to IdP, Redirect Binding, Federate
User/SP attempts Single Sign-On with Persistent Name Identifier with AllowCreate set to true. SP communication to the IdP for the SAML request is through HTTP-Redirect binding. IdP does not recognize User and thus cannot authenticate user.
IdP CONFIRM: User is not authenticated.
2. Response Failure
Being unable to authenticate User, IdP returns SAML Response with error indicating AuthnRequest failed.
SP CONFIRM: IdP returns SAML Response indicating authentication error.
2.5.3.2 Responses Message Content (Diego Lopez - diego.lopez@rediris.es)
Confirm...
+ IdP able to limit the number of <saml2:Assertion>, <saml2:AuthnStatement>, and <saml2:AttributeStatement> to one
+ IdP able to include a Consent attribute in <samlp:Response> IdP able
+ to include a SessionIndex attribute in <saml2:AuthnStatement>
2.5.4.1 Artifact Resolution Requests (Andrew Lindsay-Stewart - alindsay-stewart@fugensolutions.com)
[What should be CONFIRMED through testing from this section?]
2.5.4.2 Artifact Resolution Responses(Andrew Lindsay-Stewart - alindsay-stewart@fugensolutions.com)
[What should be CONFIRMED through testing from this section?]
2.7 SAML 2.0 Proxying (Bob Sunday - Robert.Sunday@tbs-sct.gc.ca)
The objective is to test the ability of an implementation to be configured to provide the mapping options required by the eGov2.0 profile. The eGov requirements for 2.7.1 Proxying Authentication Requests and 2.7.2 Proxying Responses can be combined into a single set of test cases.
The software under test would need to be configured 2 different ways as a Proxying IdP:
- to provide